FEATURES & BENEFITS
KO1816
BOSCH TYPE CONTROL
VALVE LAPPING UNIT
Economical Repair Solution for Control Valves
Control valve lapping is a controversial repair method, not recommended by OEMs. One of the main reasons is the compensation calculation after the lapping may become very complex, and the repair of the injector with the lapped control valve may become almost impossible.
Maktest KO4000 Cars system practically recalculates all the critical dimensions after the lapping very successfully and eliminates the risk of failing during the Flow Test.
KO1816 Bosch Type Control Valve Lapping Unit is a simple but effective solution for successfully repairing Bosch Type Control Valves.
Get A Quote
The polishing tip with the correct angle and simple lapping procedure erases the scratches and polishes the surface with precision.
An Unfit Control Value (at the right side) and control ground Control Valve (at the left side)
GET A QUOTE
GET A BROCHURE
TECHNICAL SPECIFICATIONS
TECHNICAL SPECIFICATIONS
| Motor Speed | 1320 Rpm |
|---|---|
| Motor Power | 90 W |
| Power Supply | 220 VAC 50/60Hz (1ph) |
| The Bench Dimensions / Width | 320 mm |
| The Bench Dimensions / Depth | 220 mm |
| The Bench Dimensions / Height | 520 mm |
| The Bench Dimensions / Weight | 16,2 kg |
| Package Dimensions /Width | 340 mm |
| Package Dimensions /Depth | 280 mm |
| Package Dimensions /Height | 560 mm |
| Package Dimensions /Weight | 17,2 kg |
WHAT’S INCLUDED
ADAPTERS
© 2022 MAKTEST. All rights reserved.
Bu site Best4seo.com SEO ajansı tarafından oluşturulmuştur.